New behaviour for oldsys-preseed regarding default settings

I've just changed the behaviour of oldsys-preseed in the case when a static IP address is set in the configuration of the device that is the default setting from the vendor. In the past, oldsys-preseed would try to be smart in this case and do DHCP in the assumption that the users never configured the static IP address themselves and might not want to have that setting. However, Mike (mwester) convinced me that doing DHCP when the configuration clearly says to use a static IP is a bad idea. Apparently quite a few users got confused by the old behaviour of oldsys-preseed. The new behaviour exists as of version 2.0 of oldsys-preseed which will be in rc1 of debian-installer for lenny. This change affects the Linksys NSLU2 and Thecus N2100.

Debian support for HP mv2120: putting everything together

I managed to get my hands on a HP Media Vault mv2120, a nice ARM based NAS device, a few months ago with the intentions of porting Debian to it. Unfortunately, I have been really busy lately and most of my time was spent on adding support for the QNAP TS-109/TS-209 and TS-409 (which required a lot of generic work to get Marvell Orion support into Debian, a new SoC used in many NAS devices, including the QNAP TS-x09 and HP mv2120).

There were a number of things that had to be worked out before Debian would run on the mv2120. The good news is that Marc Singer and Eugene San have done all of the heavy lifting in the last few weeks in figuring out how the mv2120 works and that now it's just a matter of putting everything together for Debian to work.

Here are the issues that had to be worked out:

• Figure out how the rescue mode works and how to construct a rescue image that the device can boot: I knew that the mv2120 had a rescue mode that can be activated by keeping the the power and reset buttons pressed when starting that would request a rescue image via the network. This rescue mode can be used to start the Debian installer. Eugene San figured out how to construct a rescue image that the mv2120 would accept. Marc Singer has also written a tool, uphpmvault, to serve such rescue images from Linux.
• Figure out the best way to make one image that contains the kernel and ramdisk: the mv2120 only loads a kernel and no ramdisk, but a ramdisk is needed to start Debian. I discussed some really ugly hacks with Marc Singer to get the mv2120 to accept an image consisting of kernel and ramdisk but Marc wanted to try something else first. u-boot, the boot loader used on the mv2120, can accept something called a multipart image which can consist of a kernel and a ramdisk. When Eugene San heard that we were trying to load a multipart image, he went ahead and figured out how to construct an image that the mv2120 would boot.

Now that these two issues are resolved, I simply need to put everything together and add support for the mv2120 to a number of debian-installer components. We already have Orion kernel images in unstable that support the HP mv2120 (along with a number of other Orion based NAS devices) and the rest shouldn't take too long.