Linux version 2.4.26-1-686 (horms@tabatha) (gcc version 3.3.4 (Debian 1:3.3.4-3)) #1 Thu Jul 22 13:00:49 JST 2004
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000003dfd0000 (usable)
 BIOS-e820: 000000003dfd0000 - 000000003dff0c00 (reserved)
 BIOS-e820: 000000003dff0c00 - 000000003dffc000 (ACPI NVS)
 BIOS-e820: 000000003dffc000 - 000000003e000000 (reserved)
95MB HIGHMEM available.
896MB LOWMEM available.
On node 0 totalpages: 253904
zone(0): 4096 pages.
zone(1): 225280 pages.
zone(2): 24528 pages.
Kernel command line: BOOT_IMAGE=Linux root=302 noacpi acpi=off
Local APIC disabled by BIOS -- reenabling.
Found and enabled local APIC!
Initializing CPU#0
Detected 597.073 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 1189.47 BogoMIPS
Memory: 996824k/1015616k available (1220k kernel code, 18404k reserved, 459k data, 112k init, 98112k highmem)
Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
Inode cache hash table entries: 65536 (order: 7, 524288 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 65536 (order: 6, 262144 bytes)
Page-cache hash table entries: 262144 (order: 8, 1048576 bytes)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 1024K
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU:     After generic, caps: a7e9fbbf 00000000 00000000 00000000
CPU:             Common caps: a7e9fbbf 00000000 00000000 00000000
CPU: Intel(R) Pentium(R) M processor 1600MHz stepping 05
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 597.1061 MHz.
..... host bus clock speed is 99.5174 MHz.
cpu: 0, clocks: 995174, slice: 497587
CPU0<T0:995168,T1:497568,D:13,S:497587,C:995174>
mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: Intel
ACPI: Subsystem revision 20040326
ACPI: Interpreter disabled.
PCI: PCI BIOS revision 2.10 entry at 0xf031f, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: ACPI tables contain no PCI IRQ routing entries
PCI: Probing PCI hardware (bus 00)
PCI: Using IRQ router ALI [10b9/1533] at 00:07.0
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
allocated 32 pages and 32 bhs reserved for the highmem bounces
VFS: Disk quotas vdquot_6.5.1
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x0
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS02 at 0x03e8 (irq = 4) is a 16550A
PCI: Found IRQ 5 for device 00:08.0
IRQ routing conflict for 00:08.0, have irq 11, want irq 5
Redundant entry in serial pci_table.  Please send the output of
lspci -vv, this message (10b9,5457,0e11,005a)
and the manufacturer and name of serial board or modem board
to serial-pci-info@lists.sourceforge.net.
register_serial(): autoconfig failed
COMX: driver version 0.85 (C) 1995-1999 ITConsult-Pro Co. <info@itc.hu>
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
Initializing Cryptographic API
NET4: Linux TCP/IP 1.0 for NET4.0
IP: routing cache hash table of 8192 buckets, 64Kbytes
TCP: Hash tables configured (established 262144 bind 65536)
Linux IP multicast router 0.06 plus PIM-SM
RAMDISK: cramfs filesystem found at block 0
RAMDISK: Loading 4364 blocks [1 disk] into ram disk... |/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|done.
Freeing initrd memory: 4364k freed
VFS: Mounted root (cramfs filesystem).
Freeing unused kernel memory: 112k freed
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ide: late registration of driver.
ALI15X3: IDE controller at PCI slot 00:10.0
ALI15X3: chipset revision 196
ALI15X3: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0x3800-0x3807, BIOS settings: hda:DMA, hdb:pio
ALI15X3: simplex device: DMA forced
    ide1: BM-DMA at 0x3808-0x380f, BIOS settings: hdc:DMA, hdd:DMA
hda: TOSHIBA MK6022GAX, ATA DISK drive
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
blk: queue f882a7a0, I/O limit 4095Mb (mask 0xffffffff)
ide2: ports already in use, skipping probe
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: attached ide-disk driver.
hda: 117210240 sectors (60012 MB), CHS=116280/16/63, UDMA(100)
Partition check:
 /dev/ide/host0/bus0/target0/lun0: p1 p2 p3 p4
Journalled Block Device driver loaded
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,2), internal journal
Real Time Clock Driver v1.10f
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
PCI: Found IRQ 10 for device 00:12.0
PCI: Sharing IRQ 10 with 00:12.1
PCI: Sharing IRQ 10 with 00:12.2
usb-ohci.c: USB OHCI at membase 0xf8834000, IRQ 10
usb-ohci.c: usb-00:12.0, NEC Corporation USB
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 3 ports detected
PCI: Found IRQ 10 for device 00:12.1
PCI: Sharing IRQ 10 with 00:12.0
PCI: Sharing IRQ 10 with 00:12.2
usb-ohci.c: USB OHCI at membase 0xf884c000, IRQ 10
usb-ohci.c: usb-00:12.1, NEC Corporation USB (#2)
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 2 ports detected
SCSI subsystem driver Revision: 1.00
Initializing USB Mass Storage driver...
usb.c: registered new driver usb-storage
USB Mass Storage support registered.
[drm] Initialized radeon 1.7.0 20020828 on minor 0
Trident 4DWave/SiS 7018/ALi 5451,Tvia CyberPro 5050 PCI Audio, version 0.14.10h, 13:04:48 Jul 22 2004
PCI: Found IRQ 11 for device 00:06.0
trident: ALi Audio Accelerator found at IO 0x3000, IRQ 11
ac97_codec: AC97 Audio codec, id: ADS116 (Unknown)
ac97_codec: AC97 Audio codec, id: ADS116 (Unknown)
PCI: Found IRQ 11 for device 00:06.0
gameport0: ALi Corporation M5451 PCI AC-Link Controller Audio Device at pci00:06.0 speed 2294 kHz
Broadcom Gigabit Ethernet Driver bcm5700 with Broadcom NIC Extension (NICE) ver. 7.1.9 (11/03/03)
PCI: Assigned IRQ 10 for device 00:13.0
eth0: Broadcom BCM5705M 1000Base-T found at mem 98000000, IRQ 10, node addr 00080297ac10
eth0: Broadcom BCM5705 Integrated Copper transceiver found
eth0: Scatter-gather ON, 64-bit DMA ON, Tx Checksum ON, Rx Checksum ON, 802.1Q VLAN ON, NAPI ON
mice: PS/2 mouse device common for all mice
device-mapper: 4.0.5-ioctl (2003-11-18) initialised: dm@uk.sistina.com
kjournald starting.  Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,4), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
ip_tables: (C) 2000-2002 Netfilter core team
ip_conntrack version 2.1 (7934 buckets, 63472 max) - 288 bytes per conntrack
bcm5700: eth0 NIC Link is UP, 100 Mbps full duplex, receive & transmit flow control ON